Denso BHT-300B Dokumentacja

• Never disassemble or modify the BHT; doing so could result in an accident such as break or fire. Never disas- semble • If smoke, abnormal odors o

PING run-time messages (that will appear in the middle of the LCD) Message Displays when: Waiting Setting up PING. Opening TCP/IP Opening devices.

Chapter 2 Getting Started the BHT and System Mode If you select one of "1: DESTINATION IP" through "5: COUNT" itemsand press t

PING Echo Request Send Timing (SEND TYPE) Two types of echo request send timings are available: TYPE 1 and TYPE 2.  TYPE 1 After sending an echo req

Chapter 2 Getting Started the BHT and System Mode (3) PING device screen On the TEST PING menu, select "3: SET DEVICE" to call up thescre

[ 6 ] System Information [6.1] Displaying the BHT system information On the SYSTEM MENU, selecting the "6: VERSION" calls up the screen s

Chapter 2 Getting Started the BHT and System Mode If the M2 key is pressed when the BHT is not placed on the CU-311 The error message shown at left

[ 7 ] Downloading/Uploading by FTP (in LAN-support software only) On the SYSTEM MENU, selecting "7: FTP" calls up the screen shownat left

Chapter 2 Getting Started the BHT and System Mode DIR/FILE entry box: The FTP client will interpret a character string entered into this box as a dir

If you select "2: SELECT FILE," the screen shown at left will appear. Choose a file to be uploaded by using the F5 and F6 keys, then press

Chapter 2 Getting Started the BHT and System Mode Run-time messages in downloading/uploading by FTP When the BHT is uploading or downloading files by

• If you will not be using the CU for a long time, be sure to unplug the AC adapter from the wall socket and disconnect the interface cable for safe

Reply codes from the FTP server The messages that FTP servers send during and after FTP operations vary, but servers all use the same reply codes as l

Chapter 2 Getting Started the BHT and System Mode [ 8 ] Deleting Program/Data Files You may delete a program file or data file stored in the flash R

[ 9 ] Deleting Font Files You may delete font files stored in the flash ROM if you do not need to display Japanese fonts (16-dot and/or 12-dot fonts)

Chapter 2 Getting Started the BHT and System Mode [ 10 ] Downloading/Uploading the BHT System Parameter File The BHT system parameter file (named &q

[10.1] Downloading the BHT system parameter file Selecting "1: DOWNLOAD" on the SYSTEM PARAMETER transfer menu calls up the screen shown

Chapter 2 Getting Started the BHT and System Mode If an error occurs during downloading If some error occurs during downloading, the BHT beeps three

[10.2] Uploading the BHT system parameter file Selecting "2: UPLOAD" on the SYSTEM PARAMETER transfer menu calls up the screen shown at l

Chapter 2 Getting Started the BHT and System Mode If an error occurs during uploading If some error occurs during uploading, the BHT beeps three time

[ 11 ] Setting the Remote Wakeup On the SYSTEM MENU, pressing the 4 key with the SF key held down calls up the screen shown at left. [1] REMOTE WAKE

Chapter 2 Getting Started the BHT and System Mode [ 12 ] Downloading/Uploading the System Message File The system message file (named "_B30MSG.

 Proper Care of the BHT and CU Clean the BHT's charge terminals and battery cartridge terminals with a cotton swab or the like periodically. Cle

[12.1] Downloading the system message file Selecting "1: DOWNLOAD" on the SYSTEM MESSAGE menu calls up the screen shown at left. With thi

Chapter 2 Getting Started the BHT and System Mode If an error occurs during downloading If some error occurs during downloading, the BHT beeps three

[12.2] Uploading the system message file Selecting "2: UPLOAD" on the SYSTEM MESSAGE transfer menu calls up the screen shown at left. Wit

Chapter 2 Getting Started the BHT and System Mode If an error occurs during uploading If some error occurs during uploading, the BHT beeps three time

[ 13 ] Updating the Systems On the SYSTEM MENU, pressing the period (.) key with the SF key held down calls up the screen shown at left. [1] SYSTEM

Chapter 2 Getting Started the BHT and System Mode If the displayed filename is different from the name of the BHT systemreconfig file you want to u

[13.2] Updating the CU-311 System via the BHT (in LAN-support software only) Before proceeding to the updating procedure, you need to download a CU-3

Chapter 2 Getting Started the BHT and System Mode If no CU-311 system reconfig file exists at the start of updating If no system file exists in the

2.6 Downloading System Reconfig Files and Updating the Current Systems 2.6.1 Updating the BHT System You may update the current BHT system in System

Chapter 2 Getting Started the BHT and System Mode 2.6.2 Updating the CU-311 System (in LAN-support software only) You may update the current CU-311

FCC Regulations This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not c

2.7 Starting Up User Programs You may start up user programs (application programs) in the BHT in several ways. This section outlines those ways. 

Chapter 2 Getting Started the BHT and System Mode Example 1: Downloading updated versions of the MAIN.PD4 and SUBMAIN.PD4 In this case, the registrat

118  Starting with the wakeup function If you specify the wakeup time in user programs, the wakeup function will automatically wake up the BHT at th

Chapter 3 Communications Operations of BHT This chapter outlines the BHT’s communications capabilities necessary for performing data and progr

3.1 Infrared Communication The BHT has an integrated infrared communications unit which enables wireless transfer of programs and data between a BHT a

Chapter 3 Communications Operations of BHT The BHT's IR communications device is IrDA-compliant. IrDA stands for Infrared Data Association, whic

3.2 RS-232C Interface Specifications [ 1 ] Interface Connector and Pin Assignment The BHT has a direct-connect interface port which is connectable to

Chapter 3 Communications Operations of BHT [ 2 ] Interface Cable Connection Connect the BHT directly to a host PC, a modem, or a printer with a dire

3.3 3.3.1 Basic Communications Specifications and Parameters Basic Communications Specifications Listed below are the communications specifications wh

Chapter 3 Communications Operations of BHT  Transmission Code and Bit Order All characters should be coded to 7- or 8-bit code for data transmission

Chapter 1 Quick Guide Chapter 2 Getting Started the BHT and System Mode Chapter 3 Communications Operations of BHT Chapter 4 Error Messages

126 3.3.2 Communications Parameters In System Mode and user programs written in BHT-BASIC, you can set the communications parameters listed below. Com

Chapter 4 Error Messages This chapter lists the error messages which will appear on the LCD if some error occurs in the BHT. 4.1 System

4.1 System Errors If some error occurs when the power is turned on or during program execution, one of the following error messages will appear on the

Chapter 4 Error Messages Shutdown due to low battery  Problem When the BHT is switched on or being on (including during executionof a program), th

Abnormal shutdown  Problem The BHT was shut down abnormally* and has been left without a battery cartridge loaded or with a discharged battery

Chapter 4 Error Messages System Program malfunction  Problem During execution of System Program, the System Program has attempted to write onto th

No user programs found  Problem When the BHT is turned on, no user programs are found.  Solution You can run the code scanning demo without user

Chapter 4 Error Messages Error in System Mode settings  Problem Your settings made in System Mode contain an error. If this error occurs, the Sys

System administrator to be called  Problem Any of the following errors has occurred: (1) Hardware error or calendar clock error (1010) Flash mem

Chapter 4 Error Messages 4.2 Errors in System Mode If some error occurs during operation in System Mode, one of the following error messages will ap

Chapter 1 Quick Guide This chapter describes the basic operating method of the BHT-300B and the related notes. 1.1 Reading Bar Codes...

 Problem You have deleted all of the files stored in the memory in the DELETE FILE menu.  Solution Press the C key to return to the SYSTEM MENU sc

Chapter 4 Error Messages  Problem The current download will exceed the maximum allowable number of files (120 files) in the memory.  Solution Pre

During uploading of a program file, data file, BHT system parameter file, or system message file  Problem The file you attempted to upload is dama

This chapter describes the handling procedure of the communication unit CU-300, the interfacing with the host PC, and the charging of the battery cart

5.1 Functions of the CU-300 The optical communication unit CU-300 series is available in three models: CU-301, CU-321 and CU-311. The CU-300 series h

Chapter 5 Handling the CU-300 (Option) 141 5.2 Components and Functions Indicator LEDShows the charging state. IrDA interface port Used to exchang

5.3 Applying Power to the CU-300 CU-301: The CU-301 should be powered from a wall socket via the dedicated AC adapter. Connect the outlet plug of the

Chapter 5 Handling the CU-300 (Option) 143 • If smoke, abnormal odors or noises come from the CU, immediately unplug the AC adapter from the wall s

5.4 5.4.1 Communicating with the Host PC Setting the Transmission Speed of the CU-300 CU-301: Set the transmission speed to the same value as that of

Chapter 5 Handling the CU-300 (Option) 145 5.4.2 Interface Cable Connection (1) CU-301/321: Unplug the AC adapter (if connected) from the wall socke

1.1 Reading Bar Codes Turn the BHT on, bring the bar-code reading window to a bar code to be scanned, and press the trigger switch. The BHT turns on t

5.4.3 Interfacing with the Host PC [ 1 ] CU-301/321 This section describes how to start communication with the host PC in System Mode. The same can

Chapter 5 Handling the CU-300 (Option) 147 [ 2 ] CU-311 This section describes how to start communication with the host PC in System Mode (FTP). (1)

5.5 Charging the Battery Cartridge You can charge a rechargeable battery cartridge being loaded in the BHT. Service Life of Rechargeable Battery Car

Chapter 5 Handling the CU-300 (Option) 149  Charging Operation and LED Indication Operator's Action CU-300 Status Indicator LED on the BHT

5.6 5.6.1 Functions Exclusive to the CU-311 Displaying the CU-311 Status You can check the machine status of the CU-311 according to the ON/OFF states

Chapter 5 Handling the CU-300 (Option) 151 5.6.2 5.6.3 Displaying the CU System Information on the BHT You can display the CU-311 system information

5.7 Interface Specifications [ 1 ] Interface Connector and Pin Assignment CU-301 The CU-301 has an RS-232C interface port (Dsub-9P). RS-232C Interfa

Chapter 5 Handling the CU-300 (Option) 153 CU-311 The CU-311 has an IEEE802.3-compliant Ethernet interface port (10Base-T). Ethernet Interface Port

[ 2 ] Interface Cable Connection CU-301 As illustrated below, connect the CU-301 (on which the BHT is placed) to a host PC with a cross-mode cable. T

Appendix A. Specifications ...

Chapter 1 Quick Guide 1.2 Setting and Using the Hand Strap  Setting the hand strap  Using the hand strap Put your hand through the hand strap

Appendix A. Specifications A.1 BHT-300B [ 1 ] Product Specifications Power Source Main power Rechargeable lithium-ion battery cartridge (3.7 VDC)

Appendices [ 2 ] Bar Code Specifications (1) Available Bar Code Types Bar code type Bar dimensions Readable magnification Universal product codes

(3) Bar Code Label Size Recommended width: 10 mm min. (0.39 inch min.) Length: Depth of field (Distance from bar codes to the bar-code reading win

Appendices [ 3 ] Interface Specifications IrDA Interface Synchronization: Start-stop Input signals: RD Output signals: SD Transmission speed:

A.2 CU-300 [ 1 ] Product Specifications CU-301 CU-321 CU-311 Power Source 100, 120 or 230 VAC (via the dedicated AC adapter) Powered from the USB i

Appendices [ 3 ] Interface Specifications CU-301 RS-232C Interface Port (Dsub-9P) on the CU-301 Pin No. Signal Functions Signal Input/Output CU-30

CU-321 The CU-321 has a Full-Speed USB 1.1-capable port (Series "B" receptacle). CU-311 The CU-311 has an IEEE802.3-compliant Ethernet inte

Appendices 163 Appendix B. A Typical Basic Operation What follows is a typical basic operation that helps you instruct the hands-on user in practical

Bar Code Handy Terminal BHT-300B User's Manual First Edition, July 2004 DENSO WAVE INCORPORATED The purpose of this manual

1.3 Setting the Backlight Pressing the M4 key (right-hand trigger switch) while holding down the SF (Shift) key activates or deactivates the backlight

Chapter 1 Quick Guide 1.4 Using the Keypad  Entering Numerical Data To enter numerical data, e.g., the quantity of goods, use the numerical keys and

Copyright © DENSO WAVE INCORPORATED, 2004 All rights reserved. No part of this publication may be reproduced in any form o

6 1.5 Transferring Data  Using infrared link The BHT uses infrared rays to transfer data to IrDA-compliant devices (communication unit CU or other BH

Chapter 2 Getting Started the BHT and System Mode This chapter outlines the system configuration and presents the operating procedures for the B

[ 6 ] System Information...

Chapter 2 Getting Started the BHT and System Mode 2.1 BHT System Configuration The BHT barcode data collection system requires the following hardware

The LAN-support BHT can operate as a LAN client in a LAN communications system by connecting to Ethernet via the LAN-support communication unit CU-311

Chapter 2 Getting Started the BHT and System Mode  Host PC Models: PC/AT, PS/2 Operating Systems and Optional Application Programs Operating Systems

 BHT-BASIC4.0 Transfer Utility (option) Running on the host PC, this utility transfers files between the BHT and the host PC, using YMODEM or BHT-Ir

Chapter 2 Getting Started the BHT and System Mode System Mode System Mode is a system program exclusively designed for the effective use of user prog

2.2 Components and Functions Indication LEDIlluminates in green when the BHT has successfully read a bar code. Liquid crystal display (LCD)Shows t

Chapter 2 Getting Started the BHT and System Mode The functions of the keys can be set by user programs. Shown below is a set of sample functions.

2.3 Preparation 2.3.1 Setting-up 1: Loading the Battery Cartridge Before the first use of the BHT, be sure to load the battery cartridge as shown bel

Chapter 2 Getting Started the BHT and System Mode • Avoid dropping the battery cartridge or letting it undergo any shock or impact. Doing so cou

 Low Battery Indication Low battery warning If the output voltage (of the battery cartridge) drops below a specified lower level while the BHT is in

Chapter 2 Getting Started the BHT and System Mode • Before battery replacement, be sure to turn the BHT off. Within three minutes from the removal

2.3.2 Setting-up 2: Setting the Calendar Clock Turn the BHT on by pressing the PW key. The following message appears. In the following cases, the a

Chapter 2 Getting Started the BHT and System Mode (3) On the SET SYSTEM screen, press the 3 key to select the "DATE/TIME" and then press

2.3.3 Adjusting the LCD Contrast & Beeper Volume and Switching the Beeper & Vibrator While holding down the M1 or M4 key (right-hand trigger

Chapter 2 Getting Started the BHT and System Mode Adjusting the LCD contrast You can adjust the LCD brightness to eight contrast levels. (1) Use the

2.3.4 Displaying the Battery Voltage Level and System Status [ 1 ] Displaying the Battery Voltage Level On the SYSTEM MENU or during execution of us

Chapter 2 Getting Started the BHT and System Mode Shift state of the keys Pressing the SF key will shift the keys and show the icon in the right bot

Preface Please READ through this manual carefully. It will enable you to operate your BHT-300B correctly. After you have finished reading the instruct

2.3.5 Battery Replacement Notes  When is battery replacement needed? If the "Charge the battery!" appears on the LCD, replace the battery c

Chapter 2 Getting Started the BHT and System Mode (2) When turning the BHT on after storage without a battery cartridge loaded: Even after the rem

2.3.6 BHT Turning-off Notes [ 1 ] "Shutdown in progress" message When the BHT is turned off by pressing the PW key or by the auto power-of

Chapter 2 Getting Started the BHT and System Mode (2) Press the 2 key while holding down the SF key again. The screen will switch to the following:

 Scandisk when the resume function is enabled If Scandisk runs when the resume function is enabled, the screen given below may appear. The screen may

Chapter 2 Getting Started the BHT and System Mode [ 4 ] If invalid files are found Even invalid files can be uploaded, so upload them to the host PC

2.4 Initializing the BHT System Initializing the system will lose program files and data files stored in the user area and make system settings rever

Chapter 2 Getting Started the BHT and System Mode (1) Selecting the memory area to be initialized Press the PW key while holding down the SF, M1 a

(3) Confirming the memory area selected for initialization Selecting the "USER AREA EXCEPT FONTS" in step (1) above willcall up the confir

Chapter 2 Getting Started the BHT and System Mode (5) Completion of initialization Upon completion of the initialization, the BHT displays the scree

How this book is organized This manual is made up of five chapters and appendices. Chapter 1 Quick Guide Describes the basic operating method of the

2.5 Operating in System Mode System Mode is an operating software exclusively designed for the effective use of the BHT, which includes various funct

Chapter 2 Getting Started the BHT and System Mode  Structure of System Mode SYSTEM MENU ← Press the PW key while holding down the SF and 1 keys.

7 and ENT keys 6 and ENT keys 5 and ENT keys Testing Used for the bar-code reading test, memory test, beeper test, aging test, LCD indication test

Chapter 2 Getting Started the BHT and System Mode In addition to the functions given on the preceding pages, System Mode has these six functions: Del

6 with SF held down Period (.) with SF held down C key Downloading/uploading the system message file Downloads or uploads the system message file. (

Chapter 2 Getting Started the BHT and System Mode 2.5.2 Operating in System Mode Some functions in System Mode require several screens to be shifted

[ 2 ] Selecting a desired setting First, select a desired item on the current screen by using the numerical key or the cursor keys (F5 and F6) so as

Chapter 2 Getting Started the BHT and System Mode 2.5.3 Detailed Description of the Functions in System Mode [ 1 ] Program Execution On the SYSTE

[ 2 ] Downloading If you download a file having the same name as one already used in the user area of the target memory in the BHT, then the newly d

Chapter 2 Getting Started the BHT and System Mode Data that can be copied from one BHT to another BHT The copying function between BHTs copies the

 Technical Terms Used in This Manual Source Program and Object Program (User Program) Generally, a source program is translated into an object progra

BHT-5000 screen compatibility mode YMODEM option IP address of FTP server User name of FTP server Password of FTP server Default directory for FTP s

Chapter 2 Getting Started the BHT and System Mode Download screens With this screen displayed, the BHT waits for a file to be downloaded.Selecting

If an error occurs during downloading If some error occurs during downloading, the BHT beeps three times and shows one of the following screens with t

Chapter 2 Getting Started the BHT and System Mode  Problem You attempted to download an invalid program file.  Solution Check whether the progra

[ 3 ] Uploading On the SYSTEM MENU, selecting "3: UPLOAD" calls up the screen shown at left. [1] ONE FILE: Uploads a user program file o

Chapter 2 Getting Started the BHT and System Mode Upload screens If you select "1: ONE FILE" and choose a file to be uploaded or if you s

If an error occurs during uploading If some error occurs during uploading, the BHT beeps three times and shows one of the following screens: To retry

Chapter 2 Getting Started the BHT and System Mode [ 4 ] System Environment Setting On the SYSTEM MENU, selecting "4: SET SYSTEM" calls u

[4.1] Setting an auto-start execution program On the SET SYSTEM menu, selecting "1: EXECUTE PROGRAM" calls up the screen shown at left. H

Chapter 2 Getting Started the BHT and System Mode STATUS (System Status Indication) Turning on the system status indication displays the following ic

SAFETY PRECAUTIONS Be sure to observe all these safety precautions.  Please READ through these instructions carefully. They will enable you to use

[4.3] Setting the calendar clock On the SET SYSTEM menu, selecting "3: DATE/TIME" calls up the screen shown at left. Use the numerical ke

Chapter 2 Getting Started the BHT and System Mode [4.4] Setting the special bar-code scanning parameters On the SET SYSTEM menu, selecting "

MINIMUM DIGITS (Minimum number of digits to be read for ITF, STF, or Codabar) You can determine the minimum number of digits to be read for ITF, STF,

Chapter 2 Getting Started the BHT and System Mode [4.5] Setting the communications environments After the BHT is initialized, the interface port and

On the SET SYSTEM menu, selecting the "5: COMMUNICATION" calls up the screen shown at left. [1] OPTICAL: Switches to the communications

Chapter 2 Getting Started the BHT and System Mode (1) Communications parameters setting screen On the SET OPTICAL screen, select "1: PARAMETE

Setting the communications parameters for the direct-connect interface On the SET COMMUNICATION menu, select "2: CONNECTOR" to call up the

Chapter 2 Getting Started the BHT and System Mode (2) Communications protocol option menu On the SET CONNECTOR screen, select "2: PROTOCOL&qu

Setting the interface port On the SET COMMUNICATION menu, select the "3: COM PORT" to call up the screen shown at left. Highlighted is the

Chapter 2 Getting Started the BHT and System Mode Setting the communications protocol type On the SET COMMUNICATION menu, select "4: PROTOCOL

To System Designers: • When introducing BHTs in those systems that could affect human lives (e.g., medicines management system), develop applications

On the PROTOCOL TYPE screen, select the "3: BHT-Ir Protocol" to call up the screen shown at left. Enter the ID number of the BHT by using

Chapter 2 Getting Started the BHT and System Mode [4.6] Defining the functions of the shift key and magic keys On the SET SYSTEM menu, selecting t

Defining the function of M1 , M2 , M3 (left-hand trigger switch), or M4 (right-hand trigger switch) key On the SET KEY menu, select "2: M1 KEY,

Chapter 2 Getting Started the BHT and System Mode [4.7] Setting the resume function On the SET SYSTEM menu, selecting "7: RESUME" calls

[4.9] Setting the TCP/IP, FTP and DHCP (in LAN-support software only) On the SET SYSTEM menu, selecting "9: TCP/IP" calls up the screensh

Chapter 2 Getting Started the BHT and System Mode (2) IP address screen On the SET TCP/IP screen, select "2: IP ADDRESS" to call up thes

[4.9-2] Setting the FTP On the SET TCP/IP, FTP and DHCP menu, select "2: SET FTP" callsup the screen shown at left. [1] SERVER: Switches

Chapter 2 Getting Started the BHT and System Mode (2) FTP options screen F5 key ⇑ ⇓ F6 key On the SET FTP menu, select "2: OPTION"

[4.9-3] Setting the DHCP On the SET TCP/IP, FTP and DHCP menu, selecting "3: DHCP" callsup the screen shown at left. The current setting is

Chapter 2 Getting Started the BHT and System Mode [ 5 ] Testing On the SYSTEM MENU, selecting "5: TEST" calls up the screen shown at lef

• If foreign material or water gets into the CU, immediately unplug the AC adapter from the wall socket or CU, disconnect the interface cable, and co

[5.1] Bar-code reading test On the TEST menu, selecting "1: BARCODE" calls up the screen shown at left. Actually read bar codes with the

Chapter 2 Getting Started the BHT and System Mode [5.2] Memory test On the TEST menu, selecting "2: MEMORY" calls up the screen shown at

[5.3] Beeper scale test On the TEST menu, selecting "3: BEEPER" calls up the screen shown at left and makes the beeper sound at three oct

Chapter 2 Getting Started the BHT and System Mode [5.5] LCD and indicator LED tests On the TEST menu, selecting "5: LCD" calls up the te

[5.6] File test On the TEST menu, selecting "6: FILE" calls up the screen shown at left. XXXXXX: Memory space being used YYYYYY: Free mem

Chapter 2 Getting Started the BHT and System Mode [5.7] Communications test In System Mode, you can test the IrDA interface port and direct-connect i

Testing the IrDA interface port On the TEST COMMUNICATION menu, selecting "1: OPTICAL" calls up the screen shown at left. At the slave BHT

Chapter 2 Getting Started the BHT and System Mode Testing the direct-connect interface port On the TEST COMMUNICATION menu, selecting "2: CONN

[5.8] Key-entry, beeper and vibrator test On the TEST menu, selecting "8: KEY & VIBRATION" calls up the screen shown at left and make

Chapter 2 Getting Started the BHT and System Mode [5.9] Testing with PING (in LAN-support software only) On the TEST menu, selecting "9: PING